Exoracing
Heat Protection
Exoracing Titanium or Carbon Exhaust WrapChoose The Right Exhaust Wrap For Your Manifold, Downpipe Or Exhaust Exoracing Titanium or Carbon Exhaust Wrap is designed to reduce radiant heat from hot exhaust parts and help protect nearby hoses, wiring, paint, brake lines, fuel lines and engine bay components. It is ideal for exhaust manifolds, turbo manifolds, downpipes, screamer pipes and other hot exhaust sections where heat control matters. Material: titanium fibreglass exhaust wrap with titanium or carbon colour options. Width options: choose 5cm for most exhaust pipes and downpipes, or 2.5cm for tight bends, small runners and awkward manifold sections. Length options: choose 5m, 10m, or 15m depending on the pipe size, number of runners, and the area you need to wrap. Temperature rating: up to 980 C continuous and 1350 C intermittent. Included: 1 roll of Exoracing exhaust wrap, 4 stainless steel cable ties and Exoracing lifetime warranty. Important: measure the pipe or manifold before ordering. Use our exhaust wrap install...
Titanium & Dress Up Bolts
Exoracing Titanium Sump Bolt Kit For Honda Civic B/D-SeriesChoose The Right Titanium Sump Bolt Kit For Your Honda B/D-Series Oil Pan The Exoracing titanium sump bolt kit replaces the original Honda B-Series and D-Series sump hardware with corrosion-resistant Grade 5 Ti-6AL-4V titanium. It is ideal when your original sump nuts and bolts are rusty, rounded, missing, or being removed during an oil pan gasket replacement, sump refresh, engine build, or bay dress-up. Fitment: designed for Honda B-Series and D-Series sumps that use 10 sump bolts and 9 sump nuts. Material: forged Grade 5 Ti-6AL-4V titanium with rolled threads for strength, low weight, and corrosion resistance. Included: 10 titanium bolts, 9 titanium nuts and Exoracing lifetime warranty. Best time to fit: install while the sump is off, during an oil service, or when replacing the sump gasket. Important: please confirm your sump hardware count before ordering. This kit does not include the sump, sump gasket, sump plug, oil, or sealant. Will This Fit My Honda? This kit is made for Ho...
Titanium & Dress Up Bolts
Exoracing Titanium Sump Bolt Kit For Honda K20 K24 K-SeriesChoose The Right Titanium Sump Bolt Kit For Your Honda K-Series The Exoracing titanium sump bolt kit is a direct replacement hardware upgrade for Honda K-Series cast alloy sump pans. It is designed for replacing rusty, corroded or rounded OEM sump bolts during an oil service, sump reseal, engine refresh, K-swap build or bay dress-up job. Fitment: designed to fit Honda K-Series cast alloy sump pans. Material: Ti-6AL-4V Grade 5 titanium for corrosion resistance, strength and low weight. Included: 18 Exoracing Grade 5 titanium sump bolts and Exoracing lifetime warranty. Install note: best fitted while the oil is already drained, especially during a sump reseal or oil service. Important: Please confirm your engine uses a compatible Honda K-Series cast alloy sump pan before ordering. The sump pan is not included. Which Option Should I Choose? Honda K-Series cast alloy sump: choose this kit if your K20 or K24 engine is running a compatible cast alloy K-Series sump pan. Engine swaps: check...
Titanium & Dress Up Bolts
Exoracing Titanium Suspension Strut Top Nuts For Honda Civic IntegraChoose The Right Titanium Strut Top Nuts For Your Honda Exoracing titanium suspension strut top nuts are designed to replace tired, rusty or mismatched Honda strut top hardware with lightweight, corrosion-resistant Grade 5 titanium nuts. They are a clean engine bay and suspension tower upgrade for modified Honda Civic, Integra, and compatible Honda builds using M10x1.25 strut top threads. Fitment: suitable for compatible Honda suspension top mounts using M10x1.25 strut top nuts. Kit options: choose 4 nuts or 6 nuts, depending on how many strut top nuts your car needs. Material: aircraft-grade titanium alloy Ti 6AL 4V, also known as Grade 5 titanium. Size: M10x1.25 thread pitch with 14mm spanner size. Best use: ideal for engine bay dress up, suspension refreshes, motorsport builds, show cars and replacing corroded OEM hardware. Important: Check your original strut top nut thread and quantity before ordering. These nuts are M10x1.25 and should only be used where that thread size is c...
Titanium & Dress Up Bolts
Exoracing Titanium Timing Chain Cover Bolt Kit For Honda K-SeriesWhy Use A Titanium Timing Chain Cover Bolt Kit? As we all know, over time, the OEM Honda engine bolts either oxidise and start to go rusty or have been slowly rounded over time by removing and refitting the timing chain. This is where our Exoracing titanium timing chain cover bolt kit comes in. Made from titanium, it fixes all of the above issues and is lighter than the OEM bolts, weighing an incredibly small 60g for the entire kit. Our range of Exoracing titanium hardware has been made using the finest quality aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5) - a material renowned for its exceptional strength-to-weight ratio. We take pride in the fact that all our fasteners are forged, and the threads are made using a unique rolling process, resulting in increased resistance to fatigue and a reduced risk of galling during fastening. Our Exoracing grade 5 Titanium hardware kits are reliable replacements for Grade 8.8 steel fasteners, offering a weight savings of approximately 45% c...
Titanium & Dress Up Bolts
Exoracing Titanium Transmission Case Bolt Kit For Honda K-SeriesWhy Use An Exoracing Titanium Transmission Case Bolt Kit? Over time, your old transmission bolts will start to corrode or round due to how many times they have been removed and refitted. Our Exoracing Honda K-Series transmission bolt kit fixes this with our replacement grade 5 titanium kit. Our titanium transmission kits are manufactured with aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5), for the highest strength and lowest weight possible. Our Honda K-Series transmission case bolt kit only weighs a staggering 181g! All our Exoracing titanium hardware is forged, and the threads are made using a unique rolling process, resulting in increased fatigue resistance and reduced risk of galling during fastening. In addition to its incredible strength, titanium generally saves around 45% weight over its steel OEM counterpart, making this kit even better and perfect for racing or high-performance applications where weight is everything. Titanium also has an incredible resistance to aggre...
Titanium & Dress Up Bolts
Exoracing Titanium Water Pump Bolt Kit For Honda K-SeriesWhy Use An Exoracing Titanium Water Pump Bolt Kit? As we all know, the OEM engine bolts, in this case, the water pump bolts, become rounded, rusted or a combination of both over time. This is where our titanium water pump bolt kit comes in, at around 45% lighter, more corrosive resistant, and looks beautiful! Our range of Exoracing titanium hardware has been manufactured using the finest aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5) - a material renowned for its exceptional strength-to-weight ratio. We take pride in the fact that all our fasteners are forged, and the threads are made using a unique rolling process, resulting in increased resistance to fatigue and a reduced risk of galling during fastening. Our Grade 5 Titanium fasteners are a reliable replacement for Grade 8.8 steel bolts, offering a weight saving of approximately 45% compared to equivalent steel bolts. This significant weight reduction is particularly beneficial in the racing industry, where every ounce matter...
Titanium & Dress Up Bolts
Exoracing Titanium Water Pump Housing Bolt Kit K-Series K20 K24Why Use An Exoracing Titanium Bolt Kit? After owning a K-Series for a while, you will notice that they become rusted or rounded after removing and refitting the water pump housing bolts. This is where our titanium kit comes in. Our range of Exoracing titanium hardware is built using the finest aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5), a material renowned for its exceptional strength-to-weight ratio. We take pride in that all our titanium fasteners are forged, and the threads are made using a unique rolling process. This results in increased resistance to fatigue and a reduced risk of galling during fastening. Our Grade 5 Titanium hardware is a reliable replacement for Grade 8.8 steel fasteners, offering a weight saving of approximately 45% compared to equivalent steel bolts. This significant weight reduction is particularly beneficial in the racing industry, where every ounce matters. This kit only weighs a small 120g, which is always helpful and will compound as you start...
Heat Protection
Exoracing Turbo Blanket V3Choose The Right Turbo Blanket For Your Turbocharger The Exoracing Turbo Blanket V3 is designed to contain heat around the turbine housing of your turbocharger. Keeping more heat inside the hot side of the turbo, it helps reduce radiant engine bay heat, protects nearby hoses, wiring, paint, intake pipework and fluid lines, and improves heat control on turbocharged road, track and drift cars. Turbo size options: choose T25, T3 or T4 based on your turbo frame size and turbine housing measurements. Colour options: choose Titanium or Carbon to match your engine bay finish. Construction: carbon or titanium weave exterior, silica insulation wool centre and stainless steel wire mesh interior. Temperature rating: working temperature up to 1200 C / 2100 F. Included: 1 Exoracing Turbo Blanket V3, 2 stainless steel spring fasteners and Exoracing lifetime warranty. Important: fit the blanket only to a clean, leak-free turbo setup. Check for oil, fuel, coolant or power steering fluid leaks befor...
Turbo Oil & Fittings
Exoracing Turbo Boost Pressure Quick Tap Fitting KitWhy Use An Exoracing Boost Quick Tap Kit If you're running an aftermarket turbo, it will not always come with a vacuum port on the compressor side. This port is crucial for regulating boost levels from the actuator or wastegate; your turbo system may not function properly without one. However, don't worry; we have a solution for you. Our quick tap kit includes all the necessary parts to install a reliable boost pressure port on the first silicone connector out of the turbo compressor outlet without drilling and tapping the housing itself. This means that with our kit, you can enjoy the full functionality and reliability of having a fitting on the compressor housing, ensuring that your turbo operates at its best. You can also use this for a normal vacuum port in any other silicone hose in your system, but it needs to be installed in the correct place, depending on which vacuum you need to pull. All you need to do is drill a 12mm hole, push the fitting through from the inside and tigh...
Turbo Gaskets
Exoracing Turbo Downpipe Gasket 5 Bolt CompositeWhy Use An Exoracing 5 Bolt Downpipe Gasket? The Exoracing 5-bolt turbo downpipe gaskets are a reliable, high-quality solution for ensuring a secure and robust seal. These gaskets are constructed from two perforated metal sheets enclosing a carbon layer to withstand high temperatures and pressures. Their primary use is in automotive applications, where they seal two flanges together, such as the turbo to the downpipe, preventing exhaust leaks. It is crucial to note that worn, split, or damaged gaskets can lead to exhaust gas leaks, significantly decreasing engine power. Therefore, in case of damage or distortion, replacing the gasket and resurfacing both mating flanges is recommended to ensure optimal sealing with the new gasket. Our Exoracing downpipe gaskets are 2mm thick and will compress to perfectly seal the turbo against the downpipe and reduce the chance of the gasket blowing out, provided they are torqued to the manufacturer's specification. Before ordering, please check the...
Turbo Gaskets
Exoracing Turbo Downpipe Gasket 5-Bolt A/R 0.63 Stainless SteelAt Exoracing, we pride ourselves on providing only the highest quality stainless steel gaskets for your automotive needs. Our gaskets are crafted from premium 304-grade stainless steel and are precisely cut and pressed to meet OEM specifications, ensuring a perfect fit every time. These gaskets are crucial in sealing two flanges together, such as the turbo, to the manifold, preventing gas from escaping and maintaining the engine's optimal performance. However, worn or damaged gaskets can lead to exhaust gas leaks, ultimately reducing engine power. To ensure an optimal seal with your new gasket, we recommend resurfacing the two mating flanges when replacing a blown or distorted gasket trust in Exoracing to provide you with the best quality gaskets for your automotive needs. Features: Manufactured from High Quality 304 Stainless Steel OEM level of quality and fitment Fixes boost leaks from old worn or split gaskets Fits T3 and T4 turbos with a .63 A/R 5 bolt turbo to downpipe outlet O...
