Exoracing
Heat Protection
Exoracing Gold and Silver Heat Reflective TapeChoose The Right Heat Reflective Tape For Intake Pipes, Panels And Tight Spaces The Exoracing gold and silver heat reflective tape is an adhesive-backed radiant heat barrier designed for intake pipework, airboxes, engine covers, bulkheads, transmission tunnels, inner wings and small panels. It is flexible, lightweight and easy to cut, making it ideal for awkward engine bay areas where a full heat sheet would be too large. Best for: intake pipes, airboxes, small panels, covers, bulkheads and tight spaces Available options: gold 5m x 5cm, gold 10m x 5cm, silver 5m x 5cm and silver 10m x 5cm Material: polymer laminated glass cloth with gold or silver reflective foil face Temperature rating: 450 C continuous and 1100 C intermittent Application: cut into strips, peel the backing and apply to a clean non-porous surface Included: heat reflective tape roll, microfibre cloth, squeegee and Exoracing lifetime warranty Fitment: use tape when you need flexible strips for pipework, small panels o...
Heat Protection
Exoracing Gold And Silver Sewn Heat Sleeve 0.5mChoose The Right Sewn Heat Sleeve For Hoses, Wiring And Lines Exoracing sewn heat sleeve is designed to protect hoses, wiring looms, oil lines, coolant lines and other engine bay parts from radiant heat. The sleeve slides over the part before installation, giving a clean permanent finish for planned hose, wiring and line routes. If you need to protect parts already fitted to the car, use Exoracing Velcro heat sleeve instead. Length: supplied in 0.5m lengths. Order quantity 2 for one continuous 1m length. Size options: 15mm ID, 20mm ID, 25mm ID and 30mm ID Colour options: gold or silver Temperature rating: 260 C direct / 600 C radiant / 1100 C melting temperature Material: lightweight polymer-laminated glass cloth Important: measure the outside diameter of the hose, cable or line you want to protect and choose the closest sleeve size up. If the route has tight bends or bulky fittings, choose the next size up. For more help, use our heat sleeve size chart . Why Use Exoracing Sewn Heat...
Heat Protection
Exoracing Gold and Silver Velcro Heat Sleeve 0.5mChoose The Right Velcro Heat Sleeve For Hoses, Wiring And Engine Bay Lines Exoracing Gold and Silver Velcro Heat Sleeve is a quick-fit reflective heat sleeve designed to protect hoses, wiring looms, AN lines, coolant hoses, oil lines, fuel lines, brake lines and power steering lines from radiant engine bay heat. The Velcro closure means it can be fitted around existing lines without disconnecting them. Size options: choose 15mm, 20mm, 25mm or 30mm inner diameter based on the outside diameter of the hose, cable or line you are protecting. Colour options: choose gold or silver depending on the look you prefer and the finish you want in the engine bay. Temperature rating: maximum temperature rating of 250 C. Construction: reflective foil face, polymer laminated glass cloth inner material and Velcro hook and loop closure. Best use: ideal when you need quick fit protection without removing hoses, wiring or AN lines. Important: measure the outside diameter of the hose, wiring or line befo...
Heat Protection
Exoracing Heat Reflective Tape Installation KitInstall Heat Reflective Tape And Sheet With A Cleaner Finish The Exoracing Heat Reflective Tape Installation Kit is designed to help you prepare, clean and apply heat reflective tape or heat reflective sheet properly. A clean surface and smooth application are both important for strong adhesion, fewer bubbles and a neater finished result. Best use: ideal for installing heat reflective tape, reflective sheet, adhesive heat barrier and other smooth-backed materials. Included tools: Exoracing microfibre cloth and felt-edge squeegee for surface preparation and application. Cleaner install: helps remove dust, grease and fingerprints before fitting reflective heat products. Bubble control: the felt-edge squeegee helps press the material down evenly and push out trapped air. Included: 1 microfibre cloth, 1 felt-edge squeegee, 1 Exoracing sticker and Exoracing lifetime warranty. Important: apply reflective tape or sheet only to a cool, clean and dry surface. For best adhesion, remove oil, g...
Turbo Oil & Fittings
Exoracing Magnetic AN Vice Jaws 6061 Billet AluminiumWhy Use Exoracing Magnetic AN Vice Jaws? Have you ever tried to make AN lines and realised that you are damaging the fittings? This is where Exoracing magnetic AN vice jaws come in. They are machined from 6061 billet aluminium and include 3 x strong neodymium magnets in each half to fit perfectly inside a vice without slipping. The benefit of using one of these is that they are shaped perfectly to fit AN fittings from AN03 up to AN20. Being machined from aluminium and anodised, they will not scratch the fittings as you install them onto the AN line. These inserts are designed to make fitting lines easier by securely holding the fittings in place. Their unique hexagonal shape perfectly matches AN fittings. Another massive advantage is that you can assemble the lines horizontally or vertically due to the unique shape machined into the aluminium. The inserts are also equipped with a magnetic backing, which keeps them in place inside the vice even when not fully clamped. These jaws can ...
Sensors & Exhaust Fittings
Exoracing O2 Lambda Sensor Adapter Weld In Nut M18x1.5 Stainless SteelChoose The Right Weld-In O2 Lambda Sensor Nut For Your Exhaust The Exoracing O2 lambda sensor adapter weld-in nut is designed to add an M18x1.5 sensor port to stainless exhaust pipework. It is useful when fitting a wideband sensor, adding an extra lambda sensor position for tuning, replacing a damaged sensor boss, or building a custom exhaust, downpipe or turbo setup that needs a clean sensor mounting point. Thread: M18x1.5, the common thread used by many narrowband and wideband oxygen sensors Material: 304 stainless steel Install type: weld-in sensor nut with machined collar Hole size guidance: drill a 22mm or 23mm hole before welding Included: 1 lambda sensor adapter nut and Exoracing lifetime warranty Important: this part must be welded into the exhaust. Confirm your sensor thread is M18x1.5, check the sensor angle/location required by your wideband or lambda sensor manufacturer, and use a professional welder if you are not confident fabricating stainless exhaust parts. Why Do Yo...
Sensors & Exhaust Fittings
Exoracing O2 Lambda Sensor Spacer M18x1.5 304 Stainless SteelWhy Do You Need To Use An O2 Spacer? If you have just installed a de-cat pipe in your car, you will notice straight away that you are getting the EML on the dash, which is really annoying! The Exoracing O2 lambda sensor spacer works by increasing the distance of the lambda sensor from the decat pipe, which reduces the reading and gives the ECU the correct reading. The lambda sensor modification allows for a quick and easy fix to the engine management light without affecting the rest of the system. It also allows you to run a decat without problems. This lambda sensor spacer is compatible with any car that uses an m18x1.5 lambda spacer, has the sensor installed post-catalytic convertor, and has enough room to use it. The Exoracing lambda sensor spacer is also incredibly strong and lightweight. It is machined from 304 stainless steel and weighs an incredibly small 39g! Please see the technical specifications table at the bottom if you are unsure about the dimensions and whether they w...
Sensors & Exhaust Fittings
Exoracing O2 Sensor Plug M18x1.5 304 Stainless SteelChoose The Right O2 Sensor Plug For Your Exhaust System The Exoracing O2 sensor plug is designed to block off an unused lambda sensor or wideband sensor port in an exhaust system. It is ideal when you have an aftermarket exhaust, decat pipe, downpipe, test pipe, manifold or custom exhaust section with an unused M18x1.5 sensor boss. Thread size: M18x1.5, the common thread used on many narrowband and wideband lambda sensor ports. Material: CNC-machined 304 stainless steel for corrosion resistance and long-term exhaust use. Included: 1 Exoracing O2 sensor plug and Exoracing lifetime warranty. Install note: removable threaded plug, so the lambda port can be used again later if needed. Important: Check your exhaust sensor boss thread before ordering. This plug is for M18x1.5 threaded lambda/O2 sensor ports. Which Option Should I Choose? M18x1.5 lambda/O2 port: choose this plug if your exhaust boss uses the common M18x1.5 sensor thread. Aftermarket exhausts: use this to block an unused se...
Turbo Oil & Fittings
Exoracing Oil Pressure Sensor AdapterChoose The Right Oil Pressure Sensor Adapter For Your Engine The Exoracing oil pressure sensor adapter lets you use the engine's existing oil pressure sensor port to add an extra oil pressure sensor, oil temperature sensor or turbo oil feed. It is CNC machined from 304 stainless steel, supplied with a crush washer, and available in six common thread layouts so you can match the adapter to your engine and sensor setup. Use case: add a turbo oil feed, oil pressure gauge, oil temperature sensor or extra monitoring port Material: CNC-machined 304 stainless steel Included: 1 oil pressure sensor adapter, 1 crush washer and Exoracing lifetime warranty Available options: 1/8" BSPT to NPT, 1/8" NPT, M10x1.0 to 1/8" NPT, M10x1.0 to NPT, 4 port M10x1.0, and 4 port M10x1.0 to 1/8" NPT Fitment: match the inlet and outlet threads to the engine block and original sensor before ordering Important: oil leaks can cause serious engine damage. Confirm your thread type before ordering, use the supplied ...
Sensors & Exhaust Fittings
Exoracing Polyurethane Exhaust Hanger MountsWhy Should I Use Polyurethane Exhaust Hanger Mounts? If you're experiencing issues with your car's exhaust system, such as knocking or rattling, we highly recommend using our Exoracing polyurethane exhaust hanger mounts. Over time, a rubber exhaust hanger will become slack and stretch, resulting in problems such as knocking sounds and the exhaust scraping against the ground while driving. This is where our top-rated Exoracing polyurethane exhaust hanger mounts come in as a reliable, long-lasting alternative that is perfect for the job. In addition to their durability, our polyurethane hangers are designed to significantly reduce vibrations. The exhaust hangers use an 11mm ID hole for the most universal fitment. At only 71g each, they are not much heavier than the OEM rubber option while being much stronger and longer-lasting. This feature proves particularly helpful for race cars with solid engine mounts or polyurethane engine mount bushes, but it can also benefit all vehicles by re...
Heat Protection
Exoracing Silicone Fibreglass High Temperature Heat Sleeve 0.5mChoose The Right Silicone Fibreglass Heat Sleeve For Your Hose Or Wiring The Exoracing silicone fibreglass high temperature heat sleeve is made to protect hoses, wiring looms, brake lines, fuel lines, oil lines and coolant lines from engine bay heat. It uses a heat-treated fibreglass inner with a silicone outer layer, giving strong insulation, abrasion protection and a clean black finish for fast-road, track, drift and turbocharged builds. Best for: hoses, cables, wiring looms and lines that need direct heat protection Temperature rating: 260 C continuous and 1200 C short-term exposure Material: heat-treated fibreglass weave with silicone outer coating Available ID sizes: 8mm, 10mm, 12mm, 15mm, 20mm, 25mm and 30mm Supplied length: 0.5m, with continuous lengths available up to 20m Included: silicone fibreglass heat sleeve, 2 Exoracing heat shrink tags and Exoracing lifetime warranty Sizing: measure the outside diameter of the hose, cable or loom you want to protect, then choose the c...
Silicone Hoses & Clamps
Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pcChoose The Right Silicone Hose Kit For Your B-Series Honda The Exoracing 6pc silicone hose kit replaces ageing coolant and heater hoses on compatible Honda Civic and Integra B16/B18 setups with reinforced 4-ply silicone hoses and a full 304 stainless steel worm drive clamp kit. It is designed for owners refreshing tired OEM rubber hoses, improving cooling-system reliability, or tidying a B-series engine bay. Fitment: Honda Civic / Integra B16 and B18 hose layouts shown in the table below. Not for B18C4 out of the box: B18C4 setups require modification and should not be bought as a direct-fit kit. Included: 6 silicone hoses, full 304 stainless steel worm drive clamp kit and Exoracing lifetime warranty. Material: high-grade 4-ply reinforced silicone with 4.5mm wall thickness. Best time to fit: install while draining coolant, replacing the radiator, doing a B-series swap, or refreshing an older cooling system. Important: compare your existing hose layout and the hose-location table bef...
