Exoracing
Silicone Hoses & Clamps
Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pcChoose The Right Silicone Hose Kit For Your D-Series Honda Civic The Exoracing 10pc silicone hose kit replaces ageing coolant hoses on 1992-2000 Honda Civic D-series models with reinforced 4-ply silicone hoses and a full 304 stainless steel worm drive clamp kit. It is designed for Civic EG/EK D15 and D16 owners refreshing tired OEM rubber hoses, improving cooling-system reliability, or tidying the engine bay. Fitment: Honda Civic EG/EK 1992-2000 D-series D15/D16 hose layouts. Check before ordering: compare your existing hose layout if your car is imported, engine-swapped, turbocharged or running an aftermarket radiator/intake setup. Included: 10 silicone hoses, a full 304 stainless steel worm drive clamp kit and Exoracing lifetime warranty. Material: 4-ply polyester-reinforced silicone with 4.5mm wall thickness. Best time to fit: install while draining coolant, replacing the radiator, doing engine-bay maintenance, or refreshing an older D-series cooling system. Important: this is a ...
Silicone Hoses & Clamps
Exoracing Silicone Hose Kit For Honda Civic Ep3 K20 K20a2 13pcChoose The Right Silicone Hose Kit For Your Honda Civic EP3 K20A2 The Exoracing 13pc silicone hose kit replaces the ageing coolant and vacuum hoses on a UK/RHD Honda Civic EP3 Type R K20A2 with reinforced 4-ply silicone hoses and a full 304 stainless steel worm drive clamp kit. It is designed for owners refreshing tired OEM rubber hoses, preventing coolant hose failure, or tidying a K20 engine bay. Confirmed fitment: UK/RHD Honda Civic EP3 Type R K20A2. Included: 13 silicone hoses, full 304 stainless steel worm drive clamp kit and Exoracing lifetime warranty. Material: high-grade 4-ply reinforced silicone with 4.5mm wall thickness. Best time to fit: install while draining coolant, replacing the radiator, refreshing the cooling system, or doing K20 bay maintenance. Important: UK/RHD EP3 Type R K20A2 fitment is confirmed. If your car is LHD, imported, engine-swapped, or has modified cooling/vacuum routing, compare the hose diagram, hose list and OE part numbers with your vehicle befor...
Silicone Hoses & Clamps
Exoracing Silicone Hose Kit For Honda Civic Fn2 K20z4 14pcChoose The Right Silicone Hose Kit For Your Honda Civic FN2 K20Z4 The Exoracing 14pc silicone hose kit replaces the ageing coolant and vacuum hoses on a Honda Civic FN2 Type R K20Z4 with reinforced 4-ply silicone hoses and a full 304 stainless steel worm drive clamp kit. It is designed for FN2 owners refreshing tired OEM rubber hoses, preventing cooling-system failure, or tidying the engine bay. Fitment: Honda Civic FN2 Type R K20Z4. Check before ordering: if your car is LHD, imported, engine-swapped or has modified cooling/vacuum routing, compare your hose layout before buying. Included: 14 silicone hoses, full 304 stainless steel worm drive clamp kit and Exoracing lifetime warranty. Material: high-grade 4-ply reinforced silicone with 4.5mm wall thickness. Best time to fit: install while draining coolant, replacing the radiator, refreshing the cooling system, or doing K20Z4 maintenance. Important: this kit is moulded for the Civic FN2 K20Z4 chassis. It does not fit EP3, DC5, FD2 or...
Silicone Hoses & Clamps
Exoracing Stainless Steel V-Band Clamp With FlangesChoose The Right Stainless V-Band Clamp For Your Exhaust Or Turbo Pipework The Exoracing stainless steel V-band clamp with flanges is a weld-on clamp kit designed to create a strong, serviceable and leak-free joint in stainless exhaust, turbo, downpipe, intake or intercooler pipework. Instead of using a flat flange, gasket and bolts, the male and female V-band flanges locate into each other and are held together by the clamp, making the joint quicker to remove and refit when you need access. Available flange bore sizes: 1.75" / 44mm, 2.0" / 51mm, 2.25" / 57mm, 2.5" / 63mm, 2.75" / 70mm, 3.0" / 76mm, 3.5" / 89mm, 3.75" / 95mm, 4.0" / 102mm and 4.5" / 114mm Material: 304 stainless steel clamp, male flange and female flange Included: 1 V-band clamp, 1 male V-band flange, 1 female V-band flange, 1 locking nut and Exoracing lifetime warranty Best for: removable exhaust sections, downpipes, turbo pipework, B-pipes, intercooler pipework and stainless fabrication work Fitment: Choose the fl...
Turbo Gaskets
Exoracing T25 T28 Turbo Gasket Stainless SteelWhy use Exoracing T25/T28 Turbo Gasket? At Exoracing, we are devoted to providing you with parts that exceed expectations. With top-quality manufacturing methods using only the best available materials, we can guarantee you'll be happy with your purchase. Your turbo gasket has the job of sealing in all exhaust gases from your engine where your turbo joins to the manifold. Without this, you would experience awful exhaust leaks that would not only cost you in performance but could actually fail your MOT as those harmful gases could creep into the cabin. Extremely precise cutting machines are used in our turbo gasket manufacturing process, ensuring you get an OEM level of fitment, meaning no headaches when installing your new parts. 304 stainless steel is our material of choice, given that it offers great formability when pressed but will always remain resistant to corrosion for years. When fitting your new turbo gasket, it's essential to check the mating faces for warpages and defe...
Turbo Gaskets
Exoracing T3 Turbocharger GasketChoose The Right T3 Turbo Gasket For Your Flange The Exoracing T3 turbocharger gasket is designed to seal a T3 turbo to manifold flange and help stop exhaust gas leaks that can reduce boost response, power and reliability. It is available in 304 stainless steel or aluminium composite, depending on your flange condition and installation needs. Fitment: T3 turbo to manifold flange Bolt centres: 85mm horizontally and 44mm vertically Material options: 304 stainless steel or perforated aluminium composite Thickness: stainless steel 0.5mm / aluminium composite 2mm Included: 1 T3 turbocharger gasket and Exoracing lifetime warranty Important: check your flange type and bolt-centre measurements before ordering. If the mating flanges are warped, resurface them before fitting a new gasket to reduce the chance of another blowout. Why Use An Exoracing T3 Turbocharger Gasket? A leaking or blown turbo gasket can let exhaust gas escape before it reaches the turbine. This can cause slower spool, red...
Turbo Gaskets
Exoracing T3 Twinscroll Turbo Gasket Stainless SteelWhy Use Exoracing T3 Twinscroll Turbo Gasket? Here at Exoracing, we are dedicated to providing you with the best quality parts possible. Our range of gaskets is a testament to that, with OEM+ quality and a lifetime warranty against manufacturing defects. If you are looking for parts that won't let you down, you've come to the right place. Your turbo gasket sits between your manifold and turbo mating flanges to ensure a proper seal and stop exhaust gasses from leaking. Our Exoracing turbo gaskets have been designed to meet OEM specifications and are cut and folded precisely to ensure a perfect seal. A leak of exhaust gasses between your turbo and manifold will cause issues with boost and air/fuel ratios, causing you to lose power and potentially harm your engine. The other main reason to avoid such a leak is that exhaust gasses making their way into the cabin are not only a MOT failure but are also harmful to your health. Our turbo gaskets are crafted from 304 Stainless Steel, whi...
Turbo Gaskets
Exoracing T4 Turbocharger GasketWhy Use An Exoracing T4 Turbocharger Gasket? The worst thing is opening up your car on boost and realising you have a blown gasket and a massive power loss. This is where our Exoracing t4 stainless steel and aluminium composite gaskets come in. At Exoracing, we pride ourselves on providing only the highest-quality stainless steel and composite gaskets. Our gaskets are crafted from premium materials and precisely cut and pressed to meet OEM specifications, ensuring a perfect fit every time. These gaskets are crucial in sealing two flanges together, such as the turbo, to the manifold, preventing gas from escaping and maintaining the engine's optimal performance and boost level. Worn or damaged gaskets can lead to exhaust gas leaks, ultimately reducing engine power. To ensure an optimal seal with your new gasket, we recommend resurfacing the two mating flanges when replacing a blown or distorted gasket. We have two options available depending on what you are using the gaskets for: a pr...
Turbo Gaskets
Exoracing T4 Twinscroll Turbo Gasket Stainless SteelWhy use Exoracing T4 Twinscroll Turbo Gasket? We pride ourselves on delivering the best quality parts possible for your automotive projects. Our range of gaskets is a testament to the quality we promise. With precise fitment and the best available materials used, you will not be let down. Your turbo gasket's job is to seal the mating flanges between your turbo and manifold, ensuring you don't get any exhaust leaks. Without this, you would experience terrible exhaust leaks and lousy performance from your engine. An exhaust leak is not only a nuisance for performance benefits but can also lead to an MOT failure, as those escaping gasses can leak into the cabin and harm your health. Our gaskets are precisely cut and pressed, giving them OEM level of fitment; this will ensure you have a trouble-free installation and a proper seal. Our Exoracing gaskets are constructed from premium-quality 304 stainless steel, offering the perfect level of formability when they are pressed. By manufac...
Silicone Hoses & Clamps
Exoracing T-Bolt Clamp Silicone Hose CouplerChoose the right T-bolt clamp for silicone hose couplers The Exoracing Stainless Steel T Bolt Clamp is designed to secure silicone hose couplers on boost pipes, intercooler pipes, intake pipes and turbo pipework. It is a stronger option than a standard worm drive hose clip and helps stop silicone couplers slipping, leaking or blowing off under boost. Use this for: silicone hose couplers, intercooler pipework, intake pipework, turbo pipework and boost pipe joins. Choose a size by measuring the outside diameter of the silicone hose once it is fitted over the pipe. Material: high-grade 304 stainless steel with nylon locking nut. Included: 1 x Exoracing 304 stainless steel T bolt clamp, 1 x locking nut and Exoracing lifetime warranty. Reason to fit now: replace weak, damaged or missing hose clips before turning boost up, fitting an intercooler, or chasing boost leaks. Important: Do not choose the clamp from pipe size alone. Silicone hose wall thickness changes the outside diameter, so ...
Titanium & Dress Up Bolts
Exoracing Titanium Alternator Bolt Kit K-Series K20 K24Why Use Exoracing Titanium K-Series Alternator Bolts? Over time, the old OEM alternator bolts become corroded or rounded after being removed and replaced multiple times. We have put together a grade 5 titanium replacement kit to fix this. Our Exoracing titanium alternator bolt kits are made using the finest aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5), a material renowned for its exceptional strength-to-weight ratio. We take pride in that all our fasteners are forged and the threads are made using a unique rolling process. This results in increased fatigue resistance and reduced risk of galling during fastening. We have tested this on multiple K-Series engines in development for fitment and the real world in racing applications and have only found one engine that doesn't fit, the k24a3, making this the most universal K-Series alternator bolt kit. Our Grade 5 Titanium hardware is a reliable replacement for Grade 8.8 steel fasteners, offering a weight saving of approximately 45%...
Titanium & Dress Up Bolts
Exoracing Titanium Intake Exhaust Manifold Nut and Stud KitChoose The Right Titanium Intake Or Exhaust Manifold Stud Kit The Exoracing titanium intake and exhaust manifold nut and stud kit is designed to replace corroded, rounded or short OEM manifold hardware with Grade 5 titanium M8x1.25 studs and matching titanium flanged nuts. It is ideal for Honda B-Series, D-Series, F-Series, H-Series and K-Series engines, especially when fitting aftermarket intake manifolds, thermal gaskets, exhaust manifolds, headers or turbo manifolds with thicker flanges. Thread and size: M8x1.25x49 titanium stud Material: Grade 5 titanium alloy stud and flanged nut Install feature: 3mm hex key tip for easier fitting without damaging the threads Best for: intake manifolds, exhaust manifolds, headers, turbo manifolds and thermal gasket installs Compatibility: suitable for combined gasket and manifold depths up to 20mm Included: selected quantity of titanium studs, matching flanged nuts and Exoracing lifetime warranty Important: choose the option that matches your e...
