Titanium & Dress Up Bolts
Titanium & Dress Up Bolts
20 x Exoracing Wheel Nuts Forged Steel or AluminiumChoose The Right Wheel Nuts For Your Aftermarket Wheels Exoracing open-ended wheel nuts are designed for aftermarket wheels that use a 60-degree conical seat. Their open-ended design allows longer or extended wheel studs to pass through the nut, making them suitable for road, track and modified cars using compatible wheels and studs. Correct fitment depends on both the wheel seat and the wheel stud thread. Do not choose by vehicle brand alone. Before ordering, confirm that your wheels use a 60-degree conical seat and that your studs are either M12x1.5 or M12x1.25. Wheel fitment Aftermarket wheels with a 60-degree conical, tapered or acorn seat Thread options Choose M12x1.5 or M12x1.25 to match your existing wheel studs Material options Forged chrome vanadium steel for greater durability or 6061 aluminium for lower weight Purchase includes 20 wheel nuts. The forged steel option also includes the matching wheel nut key Important: these wheel nuts will not fit ball-seat, radius-seat, f...
Titanium & Dress Up Bolts
Exoracing Dress Up Bolt and Washer Kit M6x1.0Choose The Right M6 Dress-Up Bolt And Washer Kit For Your Engine Bay The Exoracing dress-up bolt and washer kit is a simple engine bay styling upgrade for replacing tired, rusty or mismatched M6 bolts with stainless countersunk bolts and anodised 6061 aluminium washers. Each kit includes 8 bolts, 8 washers and the Exoracing lifetime warranty, making it ideal for tidying wings, slam panels, brackets, covers, interior panels, boot trim and non-critical engine bay fixings. Thread, length and pitch: M6x20x1.0 Pack size: 8 x 6061 billet aluminium washers and 8 x stainless steel M6 bolts Washer material: anodised 6061 aluminium, laser etched with the Exoracing logo Bolt material: stainless steel countersunk bolt Best for: engine bay dress-up, wings, slam panels, covers, brackets, interiors and boot trim Available colours: black, blue, red, purple, gold, silver, grey, green, light green and neochrome Fitment: only use this kit where your original bolt is M6x1.0 and a 20mm bolt length is su...
Titanium & Dress Up Bolts
Exoracing Engraved Flush Spark Plug Cover For Honda Ep3 Dc5 K20 K24Choose The Right Flush Spark Plug Cover For Your Honda K20/K24 The Exoracing engraved flush spark plug cover replaces the factory Honda plastic plug cover with a cleaner, lower-profile aluminium cover for K20 and K24 rocker covers. It is designed for EP3, DC5 and other K-series engine bays where you want a tidy flush finish with an engraved Exoracing logo. Fitment: fits K20 and K24 rocker covers where the factory plug cover, plastic wire housing and two OEM studs can be removed. Material: laser-cut 3mm aluminium, countersunk, precision folded and finished in textured black powder coat. Included: 1 engraved flush spark plug cover, 2 spacers, 2 M6 Torx bolts and Exoracing lifetime warranty. Install note: the plastic spark plug wiring cover must be removed so the new cover can sit flush. Important: check your rocker cover setup before ordering. Aftermarket rocker covers, modified coil wiring, non-standard studs or custom coil setups may need extra checking before fitment. Will This Fit...
Titanium & Dress Up Bolts
Exoracing Titanium Alternator Bolt Kit K-Series K20 K24Why Use Exoracing Titanium K-Series Alternator Bolts? Over time, the old OEM alternator bolts become corroded or rounded after being removed and replaced multiple times. We have put together a grade 5 titanium replacement kit to fix this. Our Exoracing titanium alternator bolt kits are made using the finest aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5), a material renowned for its exceptional strength-to-weight ratio. We take pride in that all our fasteners are forged and the threads are made using a unique rolling process. This results in increased fatigue resistance and reduced risk of galling during fastening. We have tested this on multiple K-Series engines in development for fitment and the real world in racing applications and have only found one engine that doesn't fit, the k24a3, making this the most universal K-Series alternator bolt kit. Our Grade 5 Titanium hardware is a reliable replacement for Grade 8.8 steel fasteners, offering a weight saving of approximately 45%...
Titanium & Dress Up Bolts
Exoracing Titanium Intake Exhaust Manifold Nut and Stud KitChoose The Right Titanium Intake Or Exhaust Manifold Stud Kit The Exoracing titanium intake and exhaust manifold nut and stud kit is designed to replace corroded, rounded or short OEM manifold hardware with Grade 5 titanium M8x1.25 studs and matching titanium flanged nuts. It is ideal for Honda B-Series, D-Series, F-Series, H-Series and K-Series engines, especially when fitting aftermarket intake manifolds, thermal gaskets, exhaust manifolds, headers or turbo manifolds with thicker flanges. Thread and size: M8x1.25x49 titanium stud Material: Grade 5 titanium alloy stud and flanged nut Install feature: 3mm hex key tip for easier fitting without damaging the threads Best for: intake manifolds, exhaust manifolds, headers, turbo manifolds and thermal gasket installs Compatibility: suitable for combined gasket and manifold depths up to 20mm Included: selected quantity of titanium studs, matching flanged nuts and Exoracing lifetime warranty Important: choose the option that matches your e...
Titanium & Dress Up Bolts
Exoracing Titanium Sump Bolt Kit For Honda Civic B/D-SeriesChoose The Right Titanium Sump Bolt Kit For Your Honda B/D-Series Oil Pan The Exoracing titanium sump bolt kit replaces the original Honda B-Series and D-Series sump hardware with corrosion-resistant Grade 5 Ti-6AL-4V titanium. It is ideal when your original sump nuts and bolts are rusty, rounded, missing, or being removed during an oil pan gasket replacement, sump refresh, engine build, or bay dress-up. Fitment: designed for Honda B-Series and D-Series sumps that use 10 sump bolts and 9 sump nuts. Material: forged Grade 5 Ti-6AL-4V titanium with rolled threads for strength, low weight, and corrosion resistance. Included: 10 titanium bolts, 9 titanium nuts and Exoracing lifetime warranty. Best time to fit: install while the sump is off, during an oil service, or when replacing the sump gasket. Important: please confirm your sump hardware count before ordering. This kit does not include the sump, sump gasket, sump plug, oil, or sealant. Will This Fit My Honda? This kit is made for Ho...
Titanium & Dress Up Bolts
Exoracing Titanium Sump Bolt Kit For Honda K20 K24 K-SeriesChoose The Right Titanium Sump Bolt Kit For Your Honda K-Series The Exoracing titanium sump bolt kit is a direct replacement hardware upgrade for Honda K-Series cast alloy sump pans. It is designed for replacing rusty, corroded or rounded OEM sump bolts during an oil service, sump reseal, engine refresh, K-swap build or bay dress-up job. Fitment: designed to fit Honda K-Series cast alloy sump pans. Material: Ti-6AL-4V Grade 5 titanium for corrosion resistance, strength and low weight. Included: 18 Exoracing Grade 5 titanium sump bolts and Exoracing lifetime warranty. Install note: best fitted while the oil is already drained, especially during a sump reseal or oil service. Important: Please confirm your engine uses a compatible Honda K-Series cast alloy sump pan before ordering. The sump pan is not included. Which Option Should I Choose? Honda K-Series cast alloy sump: choose this kit if your K20 or K24 engine is running a compatible cast alloy K-Series sump pan. Engine swaps: check...
Titanium & Dress Up Bolts
Exoracing Titanium Suspension Strut Top Nuts For Honda Civic IntegraChoose The Right Titanium Strut Top Nuts For Your Honda Exoracing titanium suspension strut top nuts are designed to replace tired, rusty or mismatched Honda strut top hardware with lightweight, corrosion-resistant Grade 5 titanium nuts. They are a clean engine bay and suspension tower upgrade for modified Honda Civic, Integra, and compatible Honda builds using M10x1.25 strut top threads. Fitment: suitable for compatible Honda suspension top mounts using M10x1.25 strut top nuts. Kit options: choose 4 nuts or 6 nuts, depending on how many strut top nuts your car needs. Material: aircraft-grade titanium alloy Ti 6AL 4V, also known as Grade 5 titanium. Size: M10x1.25 thread pitch with 14mm spanner size. Best use: ideal for engine bay dress up, suspension refreshes, motorsport builds, show cars and replacing corroded OEM hardware. Important: Check your original strut top nut thread and quantity before ordering. These nuts are M10x1.25 and should only be used where that thread size is c...
Titanium & Dress Up Bolts
Exoracing Titanium Timing Chain Cover Bolt Kit For Honda K-SeriesWhy Use A Titanium Timing Chain Cover Bolt Kit? As we all know, over time, the OEM Honda engine bolts either oxidise and start to go rusty or have been slowly rounded over time by removing and refitting the timing chain. This is where our Exoracing titanium timing chain cover bolt kit comes in. Made from titanium, it fixes all of the above issues and is lighter than the OEM bolts, weighing an incredibly small 60g for the entire kit. Our range of Exoracing titanium hardware has been made using the finest quality aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5) - a material renowned for its exceptional strength-to-weight ratio. We take pride in the fact that all our fasteners are forged, and the threads are made using a unique rolling process, resulting in increased resistance to fatigue and a reduced risk of galling during fastening. Our Exoracing grade 5 Titanium hardware kits are reliable replacements for Grade 8.8 steel fasteners, offering a weight savings of approximately 45% c...
Titanium & Dress Up Bolts
Exoracing Titanium Transmission Case Bolt Kit For Honda K-SeriesWhy Use An Exoracing Titanium Transmission Case Bolt Kit? Over time, your old transmission bolts will start to corrode or round due to how many times they have been removed and refitted. Our Exoracing Honda K-Series transmission bolt kit fixes this with our replacement grade 5 titanium kit. Our titanium transmission kits are manufactured with aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5), for the highest strength and lowest weight possible. Our Honda K-Series transmission case bolt kit only weighs a staggering 181g! All our Exoracing titanium hardware is forged, and the threads are made using a unique rolling process, resulting in increased fatigue resistance and reduced risk of galling during fastening. In addition to its incredible strength, titanium generally saves around 45% weight over its steel OEM counterpart, making this kit even better and perfect for racing or high-performance applications where weight is everything. Titanium also has an incredible resistance to aggre...
Titanium & Dress Up Bolts
Exoracing Titanium Water Pump Bolt Kit For Honda K-SeriesWhy Use An Exoracing Titanium Water Pump Bolt Kit? As we all know, the OEM engine bolts, in this case, the water pump bolts, become rounded, rusted or a combination of both over time. This is where our titanium water pump bolt kit comes in, at around 45% lighter, more corrosive resistant, and looks beautiful! Our range of Exoracing titanium hardware has been manufactured using the finest aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5) - a material renowned for its exceptional strength-to-weight ratio. We take pride in the fact that all our fasteners are forged, and the threads are made using a unique rolling process, resulting in increased resistance to fatigue and a reduced risk of galling during fastening. Our Grade 5 Titanium fasteners are a reliable replacement for Grade 8.8 steel bolts, offering a weight saving of approximately 45% compared to equivalent steel bolts. This significant weight reduction is particularly beneficial in the racing industry, where every ounce matter...
Titanium & Dress Up Bolts
Exoracing Titanium Water Pump Housing Bolt Kit K-Series K20 K24Why Use An Exoracing Titanium Bolt Kit? After owning a K-Series for a while, you will notice that they become rusted or rounded after removing and refitting the water pump housing bolts. This is where our titanium kit comes in. Our range of Exoracing titanium hardware is built using the finest aircraft-grade Titanium Alloy, Ti-6AL-4V (Grade 5), a material renowned for its exceptional strength-to-weight ratio. We take pride in that all our titanium fasteners are forged, and the threads are made using a unique rolling process. This results in increased resistance to fatigue and a reduced risk of galling during fastening. Our Grade 5 Titanium hardware is a reliable replacement for Grade 8.8 steel fasteners, offering a weight saving of approximately 45% compared to equivalent steel bolts. This significant weight reduction is particularly beneficial in the racing industry, where every ounce matters. This kit only weighs a small 120g, which is always helpful and will compound as you start...
