Heat Protection
Heat Protection
10 x Exoracing Stainless Steel Cable TiesChoose The Right Stainless Steel Cable Ties For High-Heat Jobs Exoracing stainless steel cable ties are designed for securing exhaust wrap, heat sleeving, hoses, wiring and other parts in areas where normal plastic cable ties can soften, melt or fail. Each pack includes 10 cable ties made from 304 stainless steel with a roller ball locking design. Pack size: 10 stainless steel cable ties Material: corrosion-resistant 304 stainless steel Size options: 4.6mm x 200mm, 4.6mm x 300mm or 8mm x 300mm Temperature rating: up to 450 C / 850 F continuous Best for: exhaust wrap, heat sleeve, wiring, hoses and high-temperature engine bay areas Important: choose a tie long enough to wrap around the part with enough tail to pull tight. Trim any excess after fitting and avoid leaving sharp edges exposed. Why Use Exoracing Stainless Steel Cable Ties? Plastic cable ties are useful around the workshop, but they are not suitable for high-heat areas near exhausts, turbochargers, manifolds or heat shield...
Heat Protection
Exoracing 10pc Heat Shrink Tags 3:1Choose The Right Heat Shrink Tags For Hoses, Sleeves And Wiring Exoracing heat shrink tags are designed to finish hose, sleeve and wiring installs neatly. They help stop braid and sleeve ends from fraying, keep routing tidy, and add a clean Exoracing finish to AN lines, heat sleeve installs and wiring looms. Pack size: 10 heat shrink tags Shrink ratio: 3:1 for a firm fit once heated Size options: 18mm or 39mm pre-shrink diameter Recovered size: 18mm shrinks to approx. 6mm / 39mm shrinks to approx. 13mm Best for: finishing silicone heat sleeve , braided sleeve, AN hose builds and wiring looms Important: choose a tag that slides over the largest part before heating, including sleeve, braid or fittings where needed. If you are unsure, use our AN hose size and heat sleeve calculator before ordering. Why Use Exoracing Heat Shrink Tags? Nothing ruins a clean build faster than messy details: sleeve ends creeping up the hose, braid fraying at the edges, and wiring runs that never look quite...
Heat Protection
Exoracing DIY Weldable Exhaust Heat Shield Kit 1000mm x 600mmBuild A Custom Heat Shield Around Your Manifold Or Exhaust The Exoracing DIY Weldable Exhaust Heat Shield Kit gives experienced DIY fabricators and professional installers the materials needed to create close-fitting thermal protection around an exhaust manifold, turbo manifold, downpipe, catalytic converter or custom exhaust section. The kit combines a 1000mm x 600mm sheet of embossed 0.1mm 304 stainless steel with a matching 1000mm x 600mm sheet of 4mm adhesive-backed high-temperature thermal insulation. The manufacturer rates the insulation for continuous exposure to temperatures up to 980 C, making it suitable for direct installation around high-temperature exhaust components. Custom fabrication: cut and form the materials around your own exhaust component Large-format kit: matching 1000mm x 600mm stainless and insulation sheets High-temperature protection: manufacturer-rated for continuous use up to 980 C Premium finish: includes two brushed stainless steel Exoracing logo plate...
Heat Protection
Exoracing Embossed Aluminium Heat ShieldChoose The Right Aluminium Heat Shield For Your Engine Bay, Firewall Or Underbody The Exoracing Embossed Aluminium Heat Shield is a rigid, formable radiant heat barrier designed to protect vulnerable areas from exhaust, turbo, manifold and downpipe heat. It can be trimmed, shaped and mounted around engine bays, firewalls, bulkheads, transmission tunnels, underbody panels, intake areas, fuel tanks, wiring, hoses and other heat-sensitive parts. Size options: choose 300mm x 1000mm for smaller focused areas, or 600mm x 1000mm for larger panels, firewalls, bulkheads and underbody sections. Material: embossed aluminium heat shield sheet with about 0.5mm base thickness and about 2mm embossed depth. Temperature rating: continuous resistance up to about 600 C and short burst resistance up to about 1100 C. Included: 1 embossed aluminium heat shield sheet, 12 self-tapping screws and Exoracing lifetime warranty. Best use: ideal for shielding panels, wiring, hoses, fuel lines, intakes, bulkheads...
Heat Protection
Exoracing External Wastegate Blanket Titanium or CarbonChoose The Right External Wastegate Blanket For Your Turbo Setup The Exoracing external wastegate blanket is designed to contain radiant heat from an external wastegate and reduce the amount of heat soaking into your engine bay. It is available in 38mm, 44mm, 50mm and 60mm sizes, with titanium or carbon finish options to match the rest of your heat-management setup. Available sizes: 38mm, 44mm, 50mm and 60mm external wastegates Available finishes: titanium or carbon weave Temperature rating: 1200 C / 2100 F working temperature Construction: carbon or titanium weave exterior with silica insulation wool centre Included: 1 external wastegate blanket, 1 stainless locking wire and Exoracing lifetime warranty Important: choose the blanket size that matches your external wastegate size. Let the wastegate cool fully before fitting, wear gloves during installation, and keep the blanket away from oil, coolant and other contaminants. Why Do I Need An External Wastegate Blanket? External wasteg...
Heat Protection
Exoracing Gold and Silver Heat Reflective Sheet 1m x 1.2mChoose The Right Heat Reflective Sheet For Panels, Airboxes And Intake Areas The Exoracing gold and silver heat reflective sheet is a large adhesive-backed thermal barrier designed to reflect radiant heat away from flat or shaped surfaces. It is ideal for airboxes, intake pipework, bulkheads, floor panels, transmission tunnels, engine covers, fuel cells, radiator panels and other areas exposed to turbo, manifold or exhaust heat. Best for: large panels, airboxes, intake areas, bulkheads and heat shields Sheet size: 1m x 1.2m Material: lightweight polymer laminated glass cloth with gold or silver reflective foil face Temperature rating: 450 C continuous and 1100 C intermittent Application: cut to shape, peel the backing and apply to a clean non-porous surface Included: 1 reflective sheet, 1 microfibre cloth, 1 squeegee and Exoracing lifetime warranty Fitment: use heat reflective sheet when you need to cover a larger surface area. If you are wrapping narrow intake pipework, smaller cov...
Heat Protection
Exoracing Gold and Silver Heat Reflective TapeChoose The Right Heat Reflective Tape For Intake Pipes, Panels And Tight Spaces The Exoracing gold and silver heat reflective tape is an adhesive-backed radiant heat barrier designed for intake pipework, airboxes, engine covers, bulkheads, transmission tunnels, inner wings and small panels. It is flexible, lightweight and easy to cut, making it ideal for awkward engine bay areas where a full heat sheet would be too large. Best for: intake pipes, airboxes, small panels, covers, bulkheads and tight spaces Available options: gold 5m x 5cm, gold 10m x 5cm, silver 5m x 5cm and silver 10m x 5cm Material: polymer laminated glass cloth with gold or silver reflective foil face Temperature rating: 450 C continuous and 1100 C intermittent Application: cut into strips, peel the backing and apply to a clean non-porous surface Included: heat reflective tape roll, microfibre cloth, squeegee and Exoracing lifetime warranty Fitment: use tape when you need flexible strips for pipework, small panels o...
Heat Protection
Exoracing Gold And Silver Sewn Heat Sleeve 0.5mChoose The Right Sewn Heat Sleeve For Hoses, Wiring And Lines Exoracing sewn heat sleeve is designed to protect hoses, wiring looms, oil lines, coolant lines and other engine bay parts from radiant heat. The sleeve slides over the part before installation, giving a clean permanent finish for planned hose, wiring and line routes. If you need to protect parts already fitted to the car, use Exoracing Velcro heat sleeve instead. Length: supplied in 0.5m lengths. Order quantity 2 for one continuous 1m length. Size options: 15mm ID, 20mm ID, 25mm ID and 30mm ID Colour options: gold or silver Temperature rating: 260 C direct / 600 C radiant / 1100 C melting temperature Material: lightweight polymer-laminated glass cloth Important: measure the outside diameter of the hose, cable or line you want to protect and choose the closest sleeve size up. If the route has tight bends or bulky fittings, choose the next size up. For more help, use our heat sleeve size chart . Why Use Exoracing Sewn Heat...
Heat Protection
Exoracing Gold and Silver Velcro Heat Sleeve 0.5mChoose The Right Velcro Heat Sleeve For Hoses, Wiring And Engine Bay Lines Exoracing Gold and Silver Velcro Heat Sleeve is a quick-fit reflective heat sleeve designed to protect hoses, wiring looms, AN lines, coolant hoses, oil lines, fuel lines, brake lines and power steering lines from radiant engine bay heat. The Velcro closure means it can be fitted around existing lines without disconnecting them. Size options: choose 15mm, 20mm, 25mm or 30mm inner diameter based on the outside diameter of the hose, cable or line you are protecting. Colour options: choose gold or silver depending on the look you prefer and the finish you want in the engine bay. Temperature rating: maximum temperature rating of 250 C. Construction: reflective foil face, polymer laminated glass cloth inner material and Velcro hook and loop closure. Best use: ideal when you need quick fit protection without removing hoses, wiring or AN lines. Important: measure the outside diameter of the hose, wiring or line befo...
Heat Protection
Exoracing Heat Reflective Tape Installation KitInstall Heat Reflective Tape And Sheet With A Cleaner Finish The Exoracing Heat Reflective Tape Installation Kit is designed to help you prepare, clean and apply heat reflective tape or heat reflective sheet properly. A clean surface and smooth application are both important for strong adhesion, fewer bubbles and a neater finished result. Best use: ideal for installing heat reflective tape, reflective sheet, adhesive heat barrier and other smooth-backed materials. Included tools: Exoracing microfibre cloth and felt-edge squeegee for surface preparation and application. Cleaner install: helps remove dust, grease and fingerprints before fitting reflective heat products. Bubble control: the felt-edge squeegee helps press the material down evenly and push out trapped air. Included: 1 microfibre cloth, 1 felt-edge squeegee, 1 Exoracing sticker and Exoracing lifetime warranty. Important: apply reflective tape or sheet only to a cool, clean and dry surface. For best adhesion, remove oil, g...
Heat Protection
Exoracing Silicone Fibreglass High Temperature Heat Sleeve 0.5mChoose The Right Silicone Fibreglass Heat Sleeve For Your Hose Or Wiring The Exoracing silicone fibreglass high temperature heat sleeve is made to protect hoses, wiring looms, brake lines, fuel lines, oil lines and coolant lines from engine bay heat. It uses a heat-treated fibreglass inner with a silicone outer layer, giving strong insulation, abrasion protection and a clean black finish for fast-road, track, drift and turbocharged builds. Best for: hoses, cables, wiring looms and lines that need direct heat protection Temperature rating: 260 C continuous and 1200 C short-term exposure Material: heat-treated fibreglass weave with silicone outer coating Available ID sizes: 8mm, 10mm, 12mm, 15mm, 20mm, 25mm and 30mm Supplied length: 0.5m, with continuous lengths available up to 20m Included: silicone fibreglass heat sleeve, 2 Exoracing heat shrink tags and Exoracing lifetime warranty Sizing: measure the outside diameter of the hose, cable or loom you want to protect, then choose the c...
Heat Protection
Exoracing Titanium or Carbon Exhaust WrapChoose The Right Exhaust Wrap For Your Manifold, Downpipe Or Exhaust Exoracing Titanium or Carbon Exhaust Wrap is designed to reduce radiant heat from hot exhaust parts and help protect nearby hoses, wiring, paint, brake lines, fuel lines and engine bay components. It is ideal for exhaust manifolds, turbo manifolds, downpipes, screamer pipes and other hot exhaust sections where heat control matters. Material: titanium fibreglass exhaust wrap with titanium or carbon colour options. Width options: choose 5cm for most exhaust pipes and downpipes, or 2.5cm for tight bends, small runners and awkward manifold sections. Length options: choose 5m, 10m, or 15m depending on the pipe size, number of runners, and the area you need to wrap. Temperature rating: up to 980 C continuous and 1350 C intermittent. Included: 1 roll of Exoracing exhaust wrap, 4 stainless steel cable ties and Exoracing lifetime warranty. Important: measure the pipe or manifold before ordering. Use our exhaust wrap install...
